Motorola ME4851 - Manual (Page 55)

Preparing your wireless headset for use
Charging the wireless headset batteries
Place the wireless headset in the charging cradle to charge.
During charging, the charging indicator will illuminate.
When the wireless headset is fully charged, the charging
indicator will flash.
It is recommended that you charge your wireless headset for
4 hour before first use.
Note : Your wireless headset takes 4 hours to fully charge.
Note : If the wireless headset batteries become completely flat,
you will need to charge the batteries for at least 2 hours before
you can use your wireless headset again.
Registering the wireless headset to another base
The wireless headset has been already registered with the base unit with whichit came.
This section is only to provide information if you want to register the wireless headset
to other base units.
Before trying to register your wireless headset, ensure that the base you are
GAP compatible. Also, that the PIN of the base is set to either "0 000"
"1234" If your base is not GAP comptible, the headset may not work.
To enable your wireless headset to function, you will need to register it to the base you
want to use it with.
54
Using Wireless Headset
using is
or
Battery
Door
Mic
Clip
Volume
Up
Phone
Key
Earphone
Volume
Down
Indicator
Charger