MSI NVIDIA MS-7504PV - Manual (Page 38)

3-10
MS-7504 Mainboard
Boot Up Num-Lock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
APIC Function
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance with PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.
MPS Table Version
This field allows you to select which MPS (Multi-Processor Specification) version to
be used for the operating system. You need to select the MPS version supported by
your operating system. To find out which version to use, consult the vendor of your
operating system.
Optical Drive AAM
Use this field to configure the AAM (Automatic Acoustic Management) mode.
CPU Feature
Press to enter the sub-menu, and the following screen appears.
Execute Bit Support
Intel's Execute Disable Bit functionality can prevent certain classes of malicious
"buffer overflow" attacks when combined with a supporting operating system.
This functionality allows the processor to classify areas in memory by where
application code can execute and where it cannot. When a malicious worm
attempts to insert code in the buffer, the processor disables code execution,
preventing damage or worm propagation.
Set Limit CPUID MaxVal to 3
The item allows you to enable and disable the CPU ID maximum value.
[Enabled] Set to [Enabled] only when you have Prescott
CPU and NT4.0 operating system.
[Disabled] Set to [Disabled] if you have operating system
other than NT4.0.
Chipset Feature
Press to enter the sub-menu, and the following screen appears.