Maxtor QSNDVR9M - Manual (Page 40)

SPOT QUAD DWELL: Channel-switching circulates from quad 1 to quad 4 (The order is: channel
1,2,3,4→channel 5,6,7,8 →channel 9,10,11,12→channel 13,14,15,16→channel 1,2,3,4→…), press “Enter”
button to get access to the configuration setup menu to modify the interval time between two sets of picture
switching. The user can use the number buttons to choose the options—from“0” to “9” seconds.
VIDEO STANDARD: Setup the video style.
There are four options to choose from: AUTO-DETECT, SWITCH, NTSC, and PAL. The DVR can detect
the video automatically if you set this option as AUTO-DETECT, you can also set the video standard manually.
3.2.3 SETUP-REC: Setup the parameter of recording (Fig 3.2.13 Setup record)
REC-PROPERTY: contains REC RESOLUTION, QUALITY and RATE (Fig 3.2.14 Setup record
property).
REC RESOLUTION: The higher the resolution, clearer the picture. The resolution from low to high is:
PAL: 360x288 CIF, 720x288, HalfD1, 720x576, D1; NTSC: 360x240 CIF, 720x240 HalfD1, 720x480 D1.
QUALITY: There are four options to choose from: low, normal, high and best. Higher the quality value,
better the picture.
RATE: The frame rate. If you choose 8, the picture recording rate is 8 frames per second.
The maximum of RATE is different when the REC RESOLUTION is different. For example:
If the record resolution is 720x576(PAL)/720x480(NTSC), there are three frame rates to choose from: 0, 1,
2, the maximum is 2.
If the record resolution is 720x288(PAL)/720x240(NTSC), there are four frame rates to choose: 0, 1, 2, 4,
the
Page 42