MGE UPS Systems 5000 RT - Manual (Page 22)

34008030EN/AA - Page 22
3. Operation
3.3 Operating modes
Normal mode
Eco mode
This is the standard operating mode, set by
default in the factory.
Under normal condition (Normal AC source
available):
LED (20) is ON.
LEDs (30), (32), (34) are green.
The equipments are protected by the UPS.
The main advantage of the Eco mode (see
glossary) is that it reduces the consumption
of electrical power.
Under normal condition (Normal AC source
available):
LED (20) is ON.
LEDs (32), (34) are green.
The equipments are supplied in ECO
mode.
If normal AC source is out of tolerance:
LEDs (20), (21) are ON.
LEDs (30), (32), (34) are green.
The equipments are protected by the UPS.
ESC
I O
34 32 30
20
ESC
I O
34 32
20
ESC
I O
34 32 30
20 21