Motorola 6809512A76-A - Manual (Page 26)

24 basics
• If you want a different word (such as
Progress), continue pressing keypad keys
to enter the remaining characters.
• Press 1 to enter punctuation or other
characters.
tap mode
Press # in a text entry screen to switch to TAP
mode. If you do not see g or m, press M > Entry
Setup
to set TAP mode as your Primary or Secondary
text entry mode.
To enter text in TAP mode, press a keypad key
repeatedly to cycle through the letters and
number on the key. Repeat this step to enter
each letter.
For example, if you press 8 one time, your
phone displays:
After 2 seconds, the character is accepted
and the cursor moves to the next position.
numeric mode
In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
displays.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.
OK DELETE
Message 765
T
Character
displays at
insertion
point.
Press OK to
accept &
store text.
Press DELETE
to erase the
character to
left of
insertion
point.