Show charge per call, show total call charges, Call charge settings, Reset call charges – Motorola PCS telephone User Manual
Page 61: Set total charge limit, Set charge type, Currency, Units, Lifetime timer
Using the Options Menu
59
Show Charge Per Call, Show Total Call Charges
A
These menu items are only available if you receive the Advice
of Charge service.
Choose to display during calls either the total call charges since
the meter was reset or the charge per call. The meter shows
phone units or currency depending on the setting of
Set
Charge Type
.
Call Charge Settings
This submenu allows you to customize your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access these options.
A
This menu item is only available if you receive the Advice of
Charge service.
Reset Call Charges
Resets your charge meters to zero.
Set Total Charge Limit
Sets the maximum limit for call charges. Once this limit has been
reached, the network will refuse any further chargeable calls.
If you switch the charge limit
On
, you will be prompted to enter a
new limit. Enter the amount as either units or currency depending
on the setting of
Set Charge Type
. Units must be entered as
whole numbers.
A
When the charge limit is activated, you will not be able to
make fax or data calls.
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message
Approaching Charge Limit
will be displayed and a
warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached, the message
Charge
Limit Reached
will be displayed and you will not be able to
make any more chargeable calls.
Once the limit is reached, the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select
Off
to switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as
either phone units or currency.
Currency
Sets the charge type to currency. You will be prompted to enter
the
Currency Name
. Enter a 3-character notation. For example,
enter USD for United States or CAD for Canada. You will then be
prompted for the
Charge Per Unit
. Enter the amount and
press O.
Units
Sets the charge type to phone units.
Lifetime Timer
This option is used to display the total time of all calls made on
your phone.
This meter can not be reset.
Reset All Timers
,
Master
Reset
, and
Master Clear
do not affect this timer.