Motorola PCS telephone - Manual (Page 19)

Making and Receiving Phone Calls 17
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press the S key.
If the phone displays Insert Card , there is no SIM card
inserted. Once inserted, the phone will check that the SIM card is
valid.
One of the following messages may appear:
• Enter PIN - a request to enter the SIM card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the phone
unlock code (if required).
• Searching... followed by a network name - as the phone
finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter PIN Code O.
As you type in each digit of the PIN code, a * character will be
displayed.
If you make a mistake, press C to remove the last digit.
Holding C down will remove the entire entry.
When the PIN code is complete, press O.
If the PIN code is incorrect, the message Wrong PIN will be
displayed, followed by Enter PIN .
! If an incorrect PIN number is entered three times consecutively,
your phone will automatically lock up and the
Blocked
message will be displayed. See ‘Unblocking Your Phone’ on
page 51 for details on unblocking.
To change the PIN code, see ‘Change SIM PIN Code’ on page 51
in the
Using the Options Menu section.
j j j jEntering Your Phone Unlock Code
If your phone displays the message Enter Phone Unlock
Code , you must enter your unlocking code by entering Unlock
Code O.
The phone unlock code is a four-digit number, initially set to
1234. To change the code, see ‘Change Unlock Code’ on page
50 in the
Using the Options Menu section.
If you forget your unlock code, press M repeatedly until the
display reads
Change Unlock Code . Press O Security Code,
enter a new unlock code, and press O.