Motorola ME6091 - Manual (Page 22)

Making an Internal Call using the Handset base or Cordless Handset
With the telephone base and cordless handset, plus any additional handsets registered to the
same base you can make internal calls between handsets
Note: If you make an internal call and the called party has not yet answered but you then receive an
incoming external call, the internal call will be cancelled to enable you to answer the external call.
1.
Press the ‘INT’ key
2. Enter the number of the telephone/handset that you would like to call
3. The called telephone/handset will ring and display the number of the handset calling
eg: Handset 1
4. When the other handset is answered you can begin your internal call
5. Replace the handset or press
as appropriate to end the call
Receiving an Internal Call
When you receive an internal call, the telephone base/handset will ring and display the number of
the calling handset eg: Handset 2
1. Lift the handset on the base or press the external call
key on the cordless handset to
answer the call
2. Replace the handset or press as appropriate to end the call
Note: If you receive an incoming External call, during an internal call between two handsets,
the internal call will be muted to receive any Caller Display information. If no Caller Display
information is received from the network, the internal call will be resumed after a few seconds.
Transferring a call to another handset
To transfer an external call to another handset
1.
During an external call, press the ‘INT’ key to put the external call on hold
2. Enter the number of the handset that you would like to transfer the call to
3.
When the called handset is answered, replace the handset or press as appropriate to
20
e
n
o
h
pel
eT
e
ht
g
ni
s
U
20
transfer the call