Philips Magnavox MRV640 - Manual (Page 9)

Output jacks (OUT 1 480p/480i)
AUDIO OUT Analog audio output (red/white jacks): Connection for an
additional device. Audio output for component video/progressive scan
COMPONENT
VIDEO Y PB PR
OUT
Component video output (red/blue/green jacks): Connection for
an additional device with component video/progressive scan outputs
Output jack (DIGITAL AUDIO OUT)
DIGITAL AUDIO
COAX OUT
Coaxial Digital audio output: Connection for a digital audio device
(amplifier/receiver)
The symbols on your DVD Recorder
display
The following symbols may appear on your DVD Recorder display:
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function.
•) Display of information, warnings
IIIIIIIIIIIIIII Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
TIMER A recording (Timer) has been programmed
TV Modulator is switched off . The antenna signal (RF signal) is only
connected to the TV when the modulator is switched off.
PRO Component Video output set to 'Progressive Scan.' If this is not
displayed, the Component Video output is set to 'Interlaced.'
o((( Remote control command has been sent
SAP Secondary audio program from the tuner is selected
ENGLISH