Philips Magnavox MRV640 - Manual (Page 42)

30
Manually setting the time & date
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
1 Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2 Select ' A ' using D or C .
3 Select 'Installation' using B or A and confirm with C .
4 Select 'Time/Date' using B or A and confirm with C .
5 Select 'Manual' with B or A .
6 Confirm with OK .
Time/Date
Manual
Time 09:02
AM/PM AM
Year 2004
Month 01
Date 01
Daylight Saving Off
To exit press
SYSTEM MENU
7 Change the time in line 'Time' using the number buttons 0..9 on
your remote control.
8 Check 'AM/PM', 'Year', 'Month', and 'Date' in the same way.
To select between the fields, use
B or A .
Change the information with D , C or the number buttons
0..9 .
9 Use D or C to select 'Daylight Saving', with B or
A select one of the following settings in 'Daylight Saving',
then press OK .
'On': The time adjusts automatically for 'Daylight Saving' Time
in April and October.
'Off': The time does not adjust for 'Daylight Saving' Time.
10 When all settings are correct, confirm with OK .
11 To end, press SYSTEM-MENU repeatedly.
If the setting has been confirmed with OK , the automatic system is disabled.
Installing your DVD recorder