Philips Magnavox MRV640 - Manual (Page 40)

28
Assigning the VCR Plus+ ® channel
numbers
If you intend to use the VCR Plus+ ® programming system, you must first assign Guide channel
numbers to the TV channels.
1 Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2 Select ' A ' using D or C .
3 Select 'Installation' (in the second menu page) using B or
A and confirm with C .
4 Select 'VCR Plus+ Ch.' using B or A and confirm with C .
Installation
VCR Plus+ Ch.
VCR Plus+ Ch. Channel
...
001 ---
002 ---
003 ---
004---
005
---
...
To exit press
SYSTEM MENU
5 Use B or A to select the 'VCR Plus+ Ch.' channel number
you want to assign to a TV channel.
6 Use D or C , or the number buttons 0..9 to select the TV
channel that corresponds to this channel number. An 'VCR
Plus+ Ch.' overview of numbers/TV channels can be found in
your daily newspaper or in your TV listings.
7 Confirm the allocation with OK . Repeat steps 5 to 6 to assign
all the channel numbers.
8 To end, press SYSTEM-MENU repeatedly.
Installing your DVD recorder