Minolta PCL6 - Manual (Page 66)

1. Troubleshooting
4-6
Tr
ou
bl
esh
oot
in
g
Chap
ter
4
If the problem persists even after these checks have been made, refer to the
documentation for the machine.
Unable to specify the
exit port No exit port can be speci-
fied if the paper size is A6
or Custom Size is specified. Check the setting of the paper
size.
Paper is not fed from
the specified paper
source. Paper will not be fed from
the specified paper source
if that paper source is
loaded with paper of a dif-
ferent size and orientation. Load the paper source with paper
of the appropriate size and in the
appropriate direction.
No watermark is
printed. A watermark may not be
printed in graphics applica-
tions. No watermark can be printed in
this case.
Unable to print
exactly as set. The paper size, paper orien-
tation, and other settings
made in the application
take precedence over those
made in the driver. Make correct settings in the
application.
Symptom Possible cause Action