Minolta PCL6 User Manual
Page 40
4. Setup tab
3-8
P
rop
er
ti
es
Se
tt
in
gs
Ch
apte
r 3
(3) Image Repeat
Prints two copies of the same page on one sheet.
• Off
Default setting
• 2-Repeat
Image Repeat is on.
(4) Paper Source
Selects the machine’s paper take-up tray to be used.
Allows you to set the Cover Page function and the OHP Interleaving function.
• Paper Source
Select the paper take-up tray to be used.
The available paper sizes are determined by the types
of paper take-up trays installed in the machine.
Available settings: Auto, Manual Feed, Tray1 to
Tray3, LCC
• Media Type
Select the type of paper.
Setting values:
Plain, Transparency (OHP),
Thick, Thin, Tab, Trace, and User
Define
• Detail of Paper Source
Make settings for the Cover Page function and OHP
interleaving function. ☞
NOTE
Some paper sizes cannot be selected. For details, refer to the User Manual of the
machine.
TIPS
• Set the paper take-up tray in the Device Options Setting tab.
• The paper take-up tray used is displayed in green in the Printer Figure area.