Minolta IP8815 - Manual (Page 21)

IP8815 Nortel IP Phone
User Guide
16 Jan. ‘09
To enable Headset Auto Mode:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous-Next softkeys and press the
OK softkey.
o Dial 4, or move the cursor to
4.Headset Auto Mode
using the
Previous-Next softkeys and press the OK softkey.
o Press the
Yes softkey to enable the Headset Auto Mode or
press the
No softkey to disable the Headset Auto Mode.
o Move to another parameter with the Return button, , and
continue the session or press the Settings ( ) button to exit
the configuration session.
5.5. Setting Flexible Buttons
Your IP8815 Phone has eight (8) flexible buttons. Normally, the first two (2) buttons are for your line.
The flexible buttons not assigned as line buttons can access various functions. The table below indicates
the available functions with a brief description of each.
Feature Description
0 No Function Unassigned
1 Speed Dial Function Dials the assigned number
2 Phone Book Function Views the personal phone book
3 Call Log Function Views the call log list
4 Mute Function Toggles the Mute feature on and off
5 Headset Function Toggles the Headset on and off
6 Redial Function Dials the last number dialed by the user.
7 Return Call Function Dials the number of the last answered call
8 Set Call Forwarding Sets the call forwarding configuration
9 Conference Function 1. Initiates a conference call
2. Joins calls in a conference
10 Transfer Function Initiates a call transfer
11 Hold Function Places an active call on hold
12 Do not disturb Toggles the DND on and off
13 Set Ringer Off Toggles the ringer on and off
14 Message Function Views the number of new and old messages stored
in the Voice Mail server, and dials the Voice Mail
server by pressing the Dial softkey
To assign a function to a flexible button not used as a line:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous-Next softkeys and press the
OK softkey.
o Dial 5, or move the cursor to
5.Flexible Key Setting
using the
Previous-Next softkeys and press the OK softkey.
Press Flexible button
Jan 23 08:30
Headset Auto Mode
Current value is ‘No’
Jan 23 08:30
Yes No