Ringer off, Enabling automatic headset operation, Ip8815 nortel ip phone user guide – Minolta IP8815 User Manual
Page 20
IP8815 Nortel IP Phone
User
Guide
15
Jan.
‘09
the configuration session.
To set delayed ring for a line:
o
Press the Setting (
) button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
Previous-Next softkeys and press the
OK softkey.
o
Dial 2, or move the cursor to
2.Ring Setting
using the
Previous-Next softkeys and press the OK
softkey.
o
Dial the Line number plus one (2 for Line 1, 3 for Line 2, etc.), or
move the cursor to
Line
n Configuration
using the
Previous-
Next softkeys and press the OK softkey. The value of
n
is the
Line button number.
o
Dial 2, or move the cursor to
2.Delayed Ring
using the
Previous-Next softkeys and press the OK softkey. . Note the
line number is shown in parenthesis after “Delayed Ring Timer”.
o
Using the dial pad enter the desired delay up to 10 seconds in
one-second increments, zero is no delay. The backspace
softkey will delete the previous character and the
Clear softkey
deletes the entire entry.
o
Press
the
OK softkey to save your entry.
o
Move to another parameter with the Return button,
, and
continue the session or press the Settings (
) button to exit the configuration session.
5.3. Ringer
Off
The IP Phone can be programmed not to ring when an incoming call is received.
To set the Ringer Off parameter:
o
Press the Setting (
) button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
Previous-Next softkeys and press the
OK softkey.
o
Dial 3, or move the cursor to
3.Ringer Off
using the
Previous-
Next softkeys and press the OK softkey.
o
Press
the
Yes softkey to enable Ringer Off, or press the No
softkey to disable Ringer Off.
o
Move to another parameter with the Return button,
, and
continue the session or press the Settings (
) button to exit
the configuration session.
5.4. Enabling Automatic Headset Operation
Your IP8815 Phone supports use of a headset with a standard RJ-11 jack. In the Headset Auto Mode,
pressing a line button automatically connects audio to the headset. Also, redial, Speed dial, Speed
number dialing and click-to-call place calls with audio through the headset.
Ringer Off
Current value is ‘No’
Jan 23
08:30
Yes
No
Delayed Ring Timer (2)
0
Jan 23
08:30
Å
Clear
OK
Ring Setting
2.Line 1 Configuration
>3.Line 2 Configuration
Jan 23
08:30
Previous
Next
OK
Line 2 Configuration
1. Ring Type
>2. Delayed Ring Timer
Jan 23
08:30
Previous
Next
OK