Announcing a call transfer, Using blind call transfer, Dss/ blf (presence) – Minolta IP8815 User Manual
Page 10: Ip8815 nortel ip phone user guide
IP8815 Nortel IP Phone
User
Guide
5
Jan.
‘09
o
Press the Hold button or the
Hold softkey. The call status changes to hold and you receive dial
tone. You may then select another line to answer or place a call. Note, if you select an idle line and
take no action for about 15 seconds, the line is disconnected.
To retrieve a held call on a different line:
o
Press the slow flashing line button.
o
Select the desired call from the displayed call list using
Previous-Next softkeys
o
Select
the
OK softkey to resume a connection with the call.
To toggle between two calls on the same line:
o
Press the Hold button or the
Resume softkey, the active call status changes to hold and the held
call connects.
3.4. Announcing a Call Transfer
Using Announcing a Call Transfer, you send an active call to another extension after announcing the call
transfer to the receiving party.
To transfer an active call:
o
Press the Transfer button or the
Transfer softkey. The active call status changes to hold and you
receive dial tone.
o
Dial the number you wish to receive the transfer.
o
Await answer and announce the transfer.
o
Hang-up the handset to complete the transfer.
To cancel a transfer, for example the second party does not answer or is busy:
o
Press
the
EndCall softkey.
3.5. Using Blind Call Transfer
You can transfer an active call to another extension without talking to the party receiving the call. The call
transfers to the new party without verifying that the new party is there or willing to receive the call.
To transfer an active call without announcing the transfer:
o
Press
the
BlindXfr softkey. The active call status changes to hold and you receive dial tone.
o
Dial the number you wish to receive the transfer.
o
Hang-up the handset to complete the transfer.
To cancel a transfer, for example you mis-dial the receiving number:
o
Press
the
EndCall softkey.
3.6. DSS/ BLF (Presence)
Your IP8815 Phone may be assigned with DSS/BLF (Direct Station Selection/Busy Lamp Field) buttons
that address the special needs associated with an Attendant or Secretarial answering position. The
specific needs for these users are:
• DSS - one-touch calling and transfers to the extensions