MITSUBISHI ELECTRIC AJ65SBT-64AD - Manual (Page 17)

3 - 2
MELSEC-A
3 SPECIFICATION
3.2 Performance Specification
Table 3.2 indicates the performance specifications of the AJ65SBT-64AD.
Table 3.2 Performance specification
Item Specification
Voltage DC -10 to +10V (input resistance 1M )
Analog input
Current DC 0 to +20mA (input resistance 250 )
Digital output 16-bit signed binary (-4096 to +4095)
Accuracy
Analog input range Digital output
Ambient
temperature
0 to 55°C
Ambient
temperature
25±5°C
Max.
Resolution
-10 to +10V
User range setting 1
(-10 to +10V)
-4000 to +4000 2.5mV
0 to 5V 1.25mV
1 to 5V
Voltage
User range setting 2
(0 to 5V)
0 to 4000
1.0mV
0 to 20mA 5µA
4 to 20mA
Current
User range setting 3
(0 to 20mA)
0 to 4000
±0.4%
(±16 digit*)
±0.2%
(±8 digit*)
4µA
I/O characteristics, maximum
resolution, accuracy
(accuracy relative to
maximum value of digital
output value)
* : digit indicates digital value.
Factory setting is -10 to +10V.
Maximum conversion speed 1ms/1 channel.
Absolute maximum input Voltage ±15 V, current ±30mA
Analog input points 4 channels/1module
Number of occupied stations 1 station (RX/RY: each 32 points, RWr/RWw: each 4 points)
Connected terminal block
7-point, 2-piece terminal block (transmission, power supply)
Direct-coupled, 18-point terminal block (analog input section) (M3 screw)
Applicable wire size 0.3 to 0.75mm
2
Applicable crimping terminal RAV1.25-3.5 (conforming to JIS C2805)
Module mounting screw
M4 screw × 0.7mm × 16mm or more (tightening torque range: 78 to 108N cm)
Can also be mounted to DIN rail
Supported DIN rail TH35-7.5Fe, TH35-7.5Al (conforming to JIS-C2B12)
DC24V (DC20.4V to DC26.4V)
External power supply
Inrush current :8.5A, within 2.3ms
24VDC internal current
consumption (A)
0.090
Noise immunity By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
Dielectric withstand voltage Between power supply/communication system batch and analog input batch: 500VAC, 1 minute
Isolation system
Across communication system terminals and all analog input terminals: Photocoupler isolated
Across power supply system terminals and all analog input terminals: Photocoupler isolated
Across channels: Non-isolated
Weight (kg) 0.20
Outline dimensions (mm) 118 (W) × 50 (H) × 40 (D)