Miele G7859 - Manual (Page 34)

Switching the machine on and off
Switching on
Close the door.
Open the stopcocks (if turned off) .
Press the I-0 button.
When the programme selector is at the
f “STOP” position a point lights up in
the display field.
Starting the programme
Turn the programme selector clock-
wise or anti-clockwise to the re-
quired programme.
The wash temperature of the se-
lected programme is shown in the
display field, except with D (COLD)
and 6 (DRAIN).
Select additional function 3
(DRYING) if required, (see “Select-
ing an additional function”).
Press the 6 “Start” button. The dis-
play field will now show the actual
temperature.
The indicator light next to the “Start”
button comes on.
Once the programme has started, all
other programmes are blocked. If the
programme selector is then turned to
another programme, the values shown
in the display field go out. The values
can be seen again only if the pro-
gramme selector is turned back to the
position of the programme currently in
operation.
Press the 4 button to alternate the
display between elapsed time and
actual temperature.
Note that during the heat-up stage in
“Main wash” and “Final rinse” the
desired temperature is shown in the
elapsed time display field.
Switching the machine on and off
30