Motorola DSR500 - Manual (Page 18)

18
Remote Control
The remote control provided with your DSR may be used to operate and access all features of your DSR.
Additionally, the remote control may also be used to operate your TV, DVD, VCR,
A/V receiver, and other home theater components.
The remote control utilizes two AA batteries which were provided with your equipment packaging. To add
batteries to the remote control, remove the cover on the center back of the remote control by pressing down the
latch and pulling outward. Position each battery in the compartment so that the flat base of the battery (-) is
against the spring and the raised contact of the battery (+) is against the flat terminal. Make sure the batteries
are securely seated and replace the panel.
The remote contol will operate the DSR while in the SAT mode. TV, VCR, and other modes may need to be
programmed (see page 20) before the remote control will operate your specific home theater components.
2
3
4
5
6
7
8
9
10
11
12
13
1
16
17
18
19
20
21
22
23
24
15
14
1. Power.
2. Mode keys (SAT, TV, VCR, AUX). Press once to set
the mode of the remote control functions. Press and
hold to program the mode for specific component
models.
3. Go Back. To return to the previous menu.
4. Navigation Keys. To navigate within menus or
change channel up and down.
5. Guide. To display the Interactive Program Guide.
6. DVR/DVD/VCR Keys. Press for rewind or
back, for play, for fast-forward or skip, for
record, for stop, and for pause.
7. Mute. To mute the TV sound.
8. Vol (+ and -). To raise or lower the volume level.
9. Interests. To display the Interests menu.
10. Favourites. Changes the channel using only your
favourite (pre-selected) channels.
11. Locks. Displays the parental controls menu.
12. Number Keys. Enter the three-digit channel
number, or the number followed by “Enter” for
channels below 100.
13. Help. To display the main help screen menu.
14. Source. To control the input source to your
components.
15. DVR List. To view a list of recorded programs.
(Select models only.)
16. Exit. To exit all menus or to view the current
channel, program title, and time.
17. Enter. Press ENTER to select a highlighted menu
option, or press ENTER to tune in the channel whose
numbers you have already pressed.
18. Info. To display detailed information about the
current program or a highlighted program in the Guide.
19. Ch (+ and -). To channel up or down. These
keys also function as page (screen) up and down
when you are viewing the guide.
20. Last Ch. To return to the last channel viewed.
21. PPV. To display the current Pay-Per-View programs.
22. Browse. To display the current program title at the
bottom of the screen, and activate the browser to pre-
view program title on other channels or at a later time.
23. Options. To display the Main Menu.
24. Enter. Press ENTER to select a highlighted menu
option, or press ENTER to tune in the channel whose
numbers you have already pressed.