Motorola DSR500 - Manual (Page 13)

13
Authorizing Your Receiver
Press the EXIT key on the remote control. Then press the number keys to select the
authorization channel. This number is obtained from your provider.
Press the OPTIONS key on the remote control, System Setup (option 6), and System Settings
(option 4), then System Status (option 7) and the menu will appear. Line A shows your Unit ID
number, which you or your installer will need to provide to authorize your unit.
Once this unit ID number is provided, press GO BACK to return to the System Settings menu.
Select Installation Settings (option 3) then select Reportback (option 3) to view the Trip Count.
When your receiver has received the authorization message the Trip Counter will advance.
Press EXIT to exit the menus or GO BACK to return to the Installation Settings menu.