MITSUBISHI ELECTRIC A111 - Manual (Page 7)

A111 Wireless Card Adaptor 7
Chapter 2 - Installation
Chapter 2
Quick Start
6. You can also see the connection quality on
the Connection page. Click OK to exit the
utility.
5. Check the Status page to see the
Association State. It should show
“Connected - xx:xx:xx:xx:xx:xx”.
3. Use Site Survey if you don’t know the name
of your access point(s).
4. Encryption settings must also match those
set in the access point. Ask your network
administrator about the settings if neces-
sary. Click Apply to save your settings