MITSUBISHI ELECTRIC A111 - Manual (Page 21)

A111 Wireless Card Adaptor 21
Chapter 3 - Reference
Chapter 3
Wireless Settings
Status - IP Config Tab
The IP Config tab shows all the current network configuration information
for the A111 card. Use it to verify your network settings.
IP Config will display all the current TCP/IP configuration values
including the IP address, subnet mask, default gateway and Windows
Internet Naming Service (WINS) and DNS configuration.
Button
IP Release - Clicking this button will attempt to release the DHCP IP
address for the A111 card in case you wish to remove your IP address.
IP Renew - Clicking this button will attempt to renew the DHCP IP
address for the A111 card in case you want to obtain a new IP address.
NOTE: The IP Release and IP Renew buttons can only be used on an
A111 card adaptor that is configured with DHCP.