MITSUBISHI ELECTRIC A111 - Manual (Page 23)

A111 Wireless Card Adaptor 23
Chapter 3 - Reference
Chapter 3
Wireless Settings
Click on Apply to save and activate the new configuration.
Channel
Use the Channel field to select the radio channel for A111 card. In an
infrastructure network, your A111 will automatically select the correct
frequency channel required to communicate with an Access Point, this
parameter will be fixed in Auto and cannot be changed. In an Ad Hoc
network, you can decide the channel number for the A111 card. Any
WLAN card can communicate in the same network if they have the same
frequency channel setting.
Data Rate
Select the transmit data rate (fixed or auto). The data rates supported for
the WLAN Cards are:
Auto – The adapter will adjust to the most suitable transmission rate.
Fix – 11g: Fix data rate to 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54
Mbps.
11b: Fix data rate to 1, 2, 5.5, or 11 Megabits per second.
Others
Encryption – Click on this to show the Encryption tab.
Advanced – Click on this to show the Advanced tab. In most cases,
the default values do not have to be changed.
Troubleshooting – Click on this to show the Troubleshooting utility.