Metra Electronics 99-5822B - Manual (Page 7)

99-5822B KIT ASSEMBLY
5
ISO MOUNT RADIO PROVISION WITH POCKET
Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A) 1
Slide the included brackets onto the
sides of the radio housings pocket
from the back of the housing
forward. (Figure B) 2
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure C) 3
Slide the head unit into the radio
opening until the side clips engage.
(Figure D) 4
Snap the trim plate into the Radio
Housing. (Figure D) 5
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.
A
B
C D