Metra Electronics 99-5822B - Manual (Page 6)

99-5822B KIT ASSEMBLY
4
DIN RADIO PROVISION WITH POCKET
Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A) 1
Slide the included brackets onto the
sides of the radio housings pocket
from the back of the housing
forward. (Figure B) 2
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure C) 3
Slide the aftermarket head unit into
the cage and secure. (Figure D) 4
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.
A
B
C D