Mercedes-Benz 2005 CLK 320 - Manual (Page 435)

434
Practical hints
Towing the vehicle
Installing towing eye bolt
Towing eye bolt CLK 320/CLK 500
1 Cover on right side of front bumper
2 Cover on right side of rear bumper
To remove cover:
̈ Press mark on cover in direction of ar-
row.
̈ Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
̈ Screw towing eye bolt to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover and snap into place.
i
If the battery is disconnected or
discharged
ț the SmartKey will not turn in the
starter switch. For more informa-
tion, see “Battery” (
୴ page 427)
and “Jump starting” ( ୴ page 430).
ț the gear selector lever will remain
locked in position P. For informa-
tion on manually unlocking the
transmission gear selector lever,
see (
୴ page 400).