Mercedes-Benz 2005 CLK 320 - Manual (Page 146)

145
Controls in detail
Control system
Instrument cluster submenu
Access the Instr. cluster submenu via
the Settings menu. Use the Instr. clus-
ter submenu to change the instrument
cluster display settings.
The following functions are available:
Selecting temperature display mode
̈ Move the selection marker with
button
æ or ç to the
Instr. cluster submenu.
̈ Press button j or k repeatedly
until the message Temp. indicator
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set tem-
perature unit to °C (degrees Celsius)
or °F (degrees Fahrenheit).
Selecting speedometer display mode
̈ Move the selection marker with
button
æ or ç to the
Instr. cluster submenu.
̈ Press button j or k repeatedly
until the message Display unit
Speed-/odometer appears in the multi-
function display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set
speedometer unit to km or miles .
Function Page
Selecting temperature display
mode 145
Selecting speedometer display
mode 145
Selecting language 146
Selecting display (speed display
or outside temperature) for the
status line 146
Selecting display (speed display
or outside temperature) for
standard display 147