Mercedes-Benz 2005 CLK 320 - Manual (Page 158)

157
Controls in detail
Control system
The following settings are available for the
easy-entry/exit feature:
Setting key-dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey
(
୴ page 119).
̈ Move the selection marker with
button
æ or ç to the
Convenience submenu.
̈ Press button j or k repeatedly
until the message Key-dependent
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set
key-dependency to on or off .
Setting parking position for exterior rear
view mirror
Use the Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers, when reverse gear R is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
୴ page 177).
̈ Move the selection marker with
button
æ or ç to the
Convenience submenu.
̈ Press button j or k repeatedly
until the message Mirror adjustment
parking aid appears in the
multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to switch
function on or off .
off The easy-entry/exit
feature is
deactivated.
Steering col. Only the steering
column is moved.
Steer. col. + seat Both the steering
column and the
seat are moved.