Mercedes-Benz 2005 CLK 320 - Manual (Page 39)

38
Getting started
Adjusting
Seat adjustment
The seat adjustment switches are located
in each door.
1 Head restraint height
2 Seat height
3 Seat cushion tilt
4 Seat fore and aft adjustment
5 Backrest tilt
̈ Switch on the ignition ( ୴ page 34).
or
̈ Open the respective door.
Seat fore and aft adjustment
̈ Press switch forward or backward in
direction of arrow 4.
Adjust seat to a comfortable seating
position that still allows you to reach
the accelerator/brake pedal safely.
The position should be as far to the rear
as possible, consistent with ability to
properly operate controls.
Seat height
̈ Press switch up or down in direction of
arrow 2.
Seat cushion tilt
̈ Press switch up or down in direction of
arrow 3 until your upper legs are
lightly supported.
Seat backrest tilt
̈ Press switch forward or backward in
direction of arrow 5 until your arms
are slightly angled when holding the
steering wheel.
Head restraint height
̈ Press switch up or down in direction of
arrow 1.
!
When moving the seat, be sure that
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.
i
The memory function ( ୴ page 119) lets
you store the setting for the seat posi-
tion together with the setting for the
steering wheel and the exterior rear
view mirrors.
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.