Philips Magnavox MBP110V/F7 - Manual (Page 7)

7 EN
INTRODUCTION
EN
(*) The unit can also be turned on by pressing these buttons or inserting a cassette tape.
1.
Q STANDBY/ON button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
2. C STOP/EJECT A button (TAPE)
• When the unit is in stop mode, press to remove the
cassette tape from the cassette compartment.
• Press to stop cassette tape playback.
3. Cassette compartment (TAPE)
• Insert a cassette tape here.
4. SOURCE button
• Press to select the component you wish to operate.
5. A OPEN/CLOSE button*
• Press to open or close the disc tray.
6. TAPE indicator
• Lights up when TAPE mode is selected.
7. DISC indicator
• Lights up when DISC mode is selected.
8. Disc tray
• Place a disc when opening the disc tray.
9. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
10. B PLAY button* (DISC)
• Press to start or resume playback.
11. C STOP button (DISC)
• Press to stop playback.
12. TRACKING –/ + buttons (TAPE)
• Press to adjust the tracking manually.
13. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
14. B PLAY button (TAPE)
• Press to start a playback of a cassette tape.
15. D F.FWD button (TAPE)
• Press to rapidly advance the cassette tape, or view
the picture rapidly in forward during playback
(forward search).
16. E REW button (TAPE)
• Press to rewind the cassette tape, or to view the
picture rapidly in reverse during playback (rewind
search).
17. Q STANDBY/ON indicator
• Lights up when the power is in the standby mode.
You must first select either DISC or TAPE operation.
DISC mode
Press [DISC].
(The DISC indicator will illuminate.)
TAPE mode
Press [TAPE].
(The TAPE indicator will illuminate.)
Front Panel
2 3 5* 4 6 1 7 8
9 10* 11 15 14 16 12 17 13
Selecting DISC or TAPE Operation
Note
• Playback will stop when you change the output mode.
DISC button
TAPE button
TAPE indicator
DISC indicator
SOURCE button
IN
TR
ODUCTION
C
O
NNECTI
O
NS
P
LAYB
A
CK
FUNCTION SETUP
V
CP
FUNCTIONS
OTH
E
RS
E8M00UD_EN.book Page 7 Thursday, July 15, 2010 10:01 AM