Program playback, Playback, 24 en – Philips Magnavox MBP110V/F7 User Manual

Page 24

PLAYBACK

You can play back the disc/card in your desired order.

In stop mode, press [MODE].

Use [K / L] to select a track / file, then press
[OK].

• For JPEG files, use [K / L] to select a folder, then press

[OK] first, and then use [K / L] to select a file, then
press [OK].

• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select “All Clear” at the bottom of the

list to erase all the tracks / files in the program.

• The programmed tracks / files are displayed in the

right hand screen.

• Use [0 / 1] to go backward / forward between the

hierarchy of folders.

Press [B (play)] to start program playback.

• The program playback will start.

To exit from the program playback mode:
• Press [RETURN] in stop mode.

Program Playback

audio CD
JPEG

:
:

Track information
File information

audio CD
JPEG

:
:

“CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.

Track / File list

: Track / File list in the original

order

Programmed list : Track / File list in the

programmed order

Cumulative playback time of all tracks / files in the
programmed list
Playback status
Current page / Total page number

Operation guide: Press [RED] to go to the previous

page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.

0 : 26 : 24

CD_DA

0:36

1:14
0:45
0:50
0:53
0:20
0:54

10
11
12
13
14

1:14
0:50
1:14
0:50
0:53
0:54
0:36

2
4
9

11
12
14

- - / 16

Program

Total

Page Prev

Page Next

Page Down

Page Up

e.g.) audio CD

Note

• During program playback, press [C (stop)] once to

set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).

• During program playback, press [C (stop)] twice to

display the program screen. To go back to the normal
program playback, press [RETURN] to exit from the
program screen, then press [B (play)].

• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program, press

[REPEAT] repeatedly until “

Track” appears

during playback. To repeat the entire program, press
[REPEAT] repeatedly until “

All” appears during

playback.

• Playback from a desired track / file and random

playback are not available during program playback.

• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;

- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just

opening the disc tray will clear the program info.)

0 : 26 : 24

CD_DA

2 / 16

0 : 01 : 05

1:14

0:50