Motorola XTNID User Manual
Page 57

55
English
T
R
OU
BLESHOOTING
Message not transmitted/
received
Confirm radios have the same Channel, Frequency, Interference
Eliminator Code and Scramble Code settings. Recharge, replace
and/or reposition batteries. Refer to ""About the Li-Ion Battery" on
page 12. Obstructions and operating indoors, or in vehicles, may
interfere: change location. Refer to "Talking and Monitoring" on
page 27. Verify that the radio is not in Scan mode. Refer to
"Programming Scan List" on page 44 and "Nuisance Channel
Delete" on page 47.
Heavy static or interference
Radios are too close, they must be at least five feet apart. Radios
are too far apart or obstacles are interfering with transmission.
Refer to "Talking and Monitoring" on page 27.
Low batteries
Recharge or replace Li-Ion battery. Replace AA batteries. Extreme
operating temperatures affect battery life. Refer to "About the Li-Ion
Battery" on page 12.
Drop-in Charger LED light
does not come on
Check radio/battery is properly inserted and check battery/charger
contacts to be sure they are clean and charging pin is inserted
correctly. Refer to "Charging the Battery" on page 19, "Drop-in Tray
Charger LED Indicators" on page 23 and "Installing the Lithium-Ion
(Li-Ion) Battery" on page 14.
Low battery LED blinking
although new batteries are
installed
Verify that the radio is set to the correct battery type. Refer to
"Installing the Lithium-Ion (Li-Ion) Battery" on page 14, "Installing
Alkaline Battery" on page 15 and "About the Li-Ion Battery" on page
12.
Symptom
Try this