MITSUBISHI ELECTRIC Trium 110 User Manual
Page 33
Th
e
m
en
u
33
• Directly from the stand-by dis-
play:
Ring tone selection
To choose an incoming ring tone:
Volume adjustments
To individually adjust the volume
level of the ring tone, key tones,
alarm tones and incoming audio
from the stand-by display, press
.
Alternatively, access Volume con-
trol from the
Settings
menu:
The display confirms the selec-
tion, naming the volume to be
adjusted.
During a call, you can adjust the
conversation volume by using
or .
Automatic ramping
Your phone was designed with an
automatic ramping feature.
When your phone rings, the vol-
ume level is lower than the vol-
ume level you have set.
Adjustment is made from low or
medium volume level to the vol-
ume level you have set (see “Vol-
ume adjustments”, page 33).
This feature is a default setting
and cannot be deactivated. Ram-
ping and Automatic Ramping are
compatible; both will work if
Ramping is activated.
Ramping
Ramping causes the incoming
ring tone to increase step by step
to the maximum volume level.
Press displays
Ring
,
Silent
,
Vibrate
,
Vibrate & ring
or
Vibrate then ring
.
Scroll to the desired setting.
Press
Select
to validate your
choice. (If any of the vibrate
options are selected the
phone briefly vibrates).
appears.
1. If you select Ring but the ring tone volume is off
the icon appears.
2. appears if you select Vibrate, Vibrate & ring or
Vibrate then ring. It takes precedence over .
3. When the phone is connected to either the Desk
Top Charger, HF kit, CLA or AC adaptor the phone
rings instead of vibrates.
4. If you choose the 'Vibrate' or 'Vibrate then ring'
option, the vibrating action replaces all the alert
and alarm tones.
Press .
Select
Settings
.
Select
Phone settings
. Select
Tones
.
Select
Melodies
.
To help you identify incoming
calls you can give the
Stand-
ard/Line 1
,
Phone names
,
SIM names
and
Line 2
calls
and
Alarm
different ring
tones.
Use or to highlight the
required call type and press
to select it.
Use or to listen to the
different ring tones. Press
to select the current tone.
Press and hold
Exit
or
to return to the stand-by dis-
play.
Press .
Select
Settings
.
1
2
1
2
3
4
5
6
1
Select
Phone settings
. Select
Tones
.
Select
Volume
.
Select
Ring
,
Keys
,
Conversa-
tion
or
Alarm
.
Use or to adjust the set-
ting.
Press
OK
to validate the
setting.
Press and hold
Exit
or
to return to the stand-by dis-
play.
If the ring tone volume level is set to 0 displays.
2
3
4
5
6
7