MITSUBISHI ELECTRIC Trium 110 - Manual (Page 19)

19
U
si
ng
y
ou
r
ph
on
e
Action when receiving a second call
You hear a 'double beep' when your
phone receives a second call. An an-
imated phone icon and the tele-
phone number (if available) also
appear.
To accept the second call
To reject the second call:
To swap between the two connect-
ed calls:
Multi-party or conference calls (net-
work dependent)
Use this feature to make or receive
between 2 to 5 calls at the same
time with all parties being able to
hear and talk with each other.
* These items in the Options menu
appear if more than 2 calls are
joined in the conference call.
Throughout the conference call the
display shows the actions you se-
lected from the options menu.
Press . This answers the second
call and puts the first call on hold.
Press Reject . This returns a
busy signal to the second caller.
Press .
Make and establish a call in
the normal way and press .
Enter another number into
the display and press . The
first call is put on hold when
the second call becomes
active.
Press
Options for the fol-
lowing menu:
1
2
3
Option Description
Auto
DTMF
to enter a DTMF string
to the active call only
Swap
Swaps between active
and call on hold
Join
Joins active and call on
hold to make a multi-
party or conference call
Mute/
Unmute
Turns on or off the mi-
crophone
End held Ends the call on hold
End ac-
tive
Ends the active call and
connects with the call
on hold
End all Ends all the calls
* Private
with
Allows you to select
and have a private con-
versation with one of
the conference callers
while putting all the
other calls on hold
Hold/Re-
trieve
Holds or retrieves the
conference call
* End one
Allows you to select
and end one of the
conference call partici-
pants
For alternate line service (ALS), you cannot make
subscribers conference calls between Line 1 and
Line 2.