Metz Plasma-TV-Set User Manual

Page 98

You can set up to four satellites in the menu "Con-
figuration". No satellite is set in the factory.
The LNB frequency is used to switch between the
high and low frequency bands. The default fre-
quencies Low band 9.75 GHz and High band
10.60 GHz

are set in the factory.

Selecting satellites
• Press the MENU key to open the TV menu.
• Press the red key

to open the menu "Confi-

guration".

• Press the appropriate numeric key (in this exam-

ple

ᕥ to select "DVB-S".

• Press the appropriate numeric key (in

this example

ᕣ to select "Satellite A".

• Use the - + key to select the desired

satellite. The most common satellites
are displayed one after the other,
together with the symbol rates for
each one. Depending on the satellite,
it may be necessary to set additional
symbol rates

manually if the selected

satellite uses different symbol rates
and you wish to find the related
transponders in an automatic station
search.

• Use the cursor control key to select "Low band"

or "High band". The settings depend on the
components installed in the satellite antenna. For
the correct settings, please consult the data sheet
or the label of the LNB(s) being used.

• Press the OK key to confirm the new settings.
• Press the EXIT key to close the TV menu.

Calling the menu

A1.2 Set-up of satellite system

Selecting satellites

ᕥ

ᕣ

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

EXIT

General settings

Manuall search

Automatic search

Search settings

Satellite D
Satellite C

Satellite B

Astra 1

DiSEqC system

LNB supply voltage

Function for F2
Function for F1

EURO sockets

DVB-C

DVB-T

DVB-S

Analog-TV

Country

Language

Operating

Satellite

Astra 1 Symbol rate 1 22000

Low band 9,75 GHz Symbol rate 2 27500
High band10,60 GHz Symbol rate 3 - - - - -

Change with the

numeric keys or

. Accept

value with

➔

– +

605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 98