Metz Plasma-TV-Set - Manual (Page 44)

44
The remote control has four function keys: F1, F2,
F3 and AV. You can programme these function
keys with any of the available functions.
If you press and hold any function key, a
window with the available functions is
displayed. The picture on the left shows
the functions available for the F2 key.
Programming function key F1,
F2, F3 or AV with a function
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the "Configura-
tion" menu.
• Press and hold the F1 key to display the availa-
ble functions.
• Use the cursor control key ̄̆ or the correspon-
ding numeric keys to select the desired "Func-
tion for.." (in this example: F2).
• Press the "OK" key and then use the cursor con-
trol key to select one of the available functions.
• Press the "OK" key to assign this function to the
selected function key (the selected function is
marked with "X").
• Press the "EXIT" key to close the TV
menu.
If a function key is programmed
with a function, this function can
be called by briefly pressing the
function key. Pressing and hol-
ding the function key displays a
list of all available functions.
☞
18.1 Programming the Function Keys Opening the menu
F2
F1
MENU
Special functions 2
1 Normal/Speech
9 Timer overview
0 Direct recording
Direct recording
Timer overview
Language of prog
Normal/Speech
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Function for F2 Timer overview
select
save and
clear.
OK
✗
OK
EXIT
F1 ➔
605 47 2029.A2 LCD-GB 10.03.2006 8:52 Uhr Seite 44