Metz Plasma-TV-Set - Manual (Page 48)

48
The Electronic Programme Guides are
broadcast by several different stations,
and the information is therefore presented
in various layouts. You can thus choose
between different EPGs with different
appearances.
• TV set with a single tuner: select the EPG
programme position and leave it selec-
ted for 30 minutes
• TV set with two tuners: the TV set col-
lects the EPG data with the aid of the
second tuner.
Special notes:
All stations which are found by a station
search are displayed in the station table
and also listed in the EPG. Stations which
carry two different programmes at diffe-
rent times of the day must be stored in two
programme positions (see Section 24).
You can select which stations are to be lis-
ted in the EPG.
Normally, the data for all stations are col-
lected and displayed. If you wish to exclu-
de certain stations from the EPG, proceed
as follows:
• Press the "MENU" key to open the TV
menu.
• Press the white key to display the
menu station table with the active pro-
gramme position marked.
• Press the F2 key to enable editing of the
station table.
• Press the cursor control key ̈ to move
to the subjects list.
• Press numeric key
·
to delete the
mark (x) at the beginning of the line
"Include station in EPG".
• If you wish to exclude further stations
from the EPG, use the cursor control
keys
̇ ̈ ̄̆ to select each station
and repeat the above step.
The data collection operation is inter-
rupted if:
- the Teletext function is called;
- a recording is programmed in the
menu "AV recording";
- a "timer recording” is active or will
start within one hour;
- the Teletext function "Subtitles" is acti-
vated.
If you switch the TV set to the standby
state during the data-collection opera-
tion, the green LED lights or "EPG" is
displayed to indicate that data collection
is still running.
20.2 Collecting EPG Data
Not possible with an external receiver !
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 48