Metz Plasma-TV-Set - Manual (Page 59)

59
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Use the corresponding numeric key (in the
example:
´
) to select " DVB-T".
• In the setting window "Antenna", you can switch
the supply voltage for an antenna on or off with
the - + key (see also page 58).
• Use the corresponding numeric key (in
the example:
·
) to select "search set-
tings".
• In the setting window, use the - + key
to select "All", "FTA only" or "FTA +
CICAM" (see also page 58).
• Press the "OK" key and use the corres-
ponding numeric key (in the example:
¿
) to select "Manual search".
• In the setting window, use the numeric
keys to enter the channel number or
the frequency.
If you know further data of the des-
ired station, select the menu item "Mod.
parameter" and use the - + key to change
the setting there to "Manual". You can then
enter further data.
• After input of the station data, use the cursor
control key to select the menu item "Station
search" and press the "OK" key to confirm your
selection.
The station settings are saved.
22.2 Setting Stations
Manual DVB-T station search
Opening the menu
General settings
Manuall search
Automatic search
Search settings
Antenna
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Channel 05 Frequency177.500 Mhz
Mod.-Parameter auto. Start station search
Change with
Accept value with
F1 ➔
MENU
ᕥ
ᕤ
Transmission 8k Mode Modulation64 QAM
Mod. Parameter manuell Guard Intervall 1/8
Code rate
3/4 Start station search
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 59