Mercedes-Benz 2004 C-Class Wagon - Manual (Page 346)

346
Technical data
Fuels, coolants, lubricants, etc.
̄ Fuels, coolants, lubricants, etc.
Capacities
Vehicle components and their respective
lubricants must match. Therefore only use
brands tested and approved by
Mercedes-Benz. Please refer to the Factory Approved
Service Products pamphlet, or inquire at
your Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants, etc.
Engine with oil filter C 240
C 320
C 240 4MATIC
C 320 4MATIC 7.9 US qt (7.5 l)
7.9 US qt (7.5 l)
7.4 US qt (7.0 l)
7.4 US qt (7.0 l) Approved engine oils
Automatic transmission 8.5 US qt (8.0 l) MB Automatic Transmission Oil
Rear axle 1.2 US qt (1.1 l) Hypoid gear oil SAE 85 W 90
Front axle C 240 4MATIC
C 320 4MATIC 0.5 US qt (0.46 l) Hypoid gear oil SAE 85 W 90
Transfer case C 240 4MATIC
C 320 4MATIC approx. 0.62 US qt (0.59 l) MB Transfer case fluid
Power steering approx. 1.1 US qt (1.0 l) MB Power Steering Fluid (Pentosin CHF 11S)
Front wheel hubs approx. 2.1 oz (60 g) each High temperature roller bearing grease
Brake system 0.5 US qt (0.5 l) MB Brake Fluid (DOT 4+)
Cooling system approx. 6.8 US qt (6.4 l) MB 325.0 Anticorrosion/Antifreeze Agent