Mercedes-Benz 2004 C-Class Wagon - Manual (Page 127)

127
Controls in detail
Control system
Selecting display (speed display or
outside temperature)
̈ Move the selection marker with
the
æ or ç button to the
INSTRUMENT CLUSTER submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
SELECT DISPLAY .
The selection marker is on the current
setting.
̈ Press æ or ç to select the
display permanently shown in the
multifunction display.
Lighting submenu
Access the LIGHTING submenu via the
SETTINGS menu. Use the LIGHTING
submenu to change the lamp and lighting
settings on your vehicle. The following
functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the
æ or ç button to the
LIGHTING submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
LIGHT CIRCUIT HEADLIGHT
MODE .
The selection marker is on the current
setting.
̈ Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
Function Page
Set daytime running lamp mode
(USA only) 127
Set locator lighting 128
Exterior lamps delayed shut-off 129
Interior lighting delayed shut-off 130
୴୴