Motorola TETRA MTM800 - Manual (Page 23)

21
En
g
li
s
h
Calls (Private and Phone Calls)
Private Call
A Private Call, also called Point-to-Point or individual call, is a call
between two individuals. No other terminal can hear the
conversation. This call can be:
• full-duplex call (if the system allows) in TMO
• standard half-duplex call in TMO or DMO
Making a Private Call
1. To enter the Private Mode, press until Private Mode
appears on the display.
2. Enter the number of the person you wish to call.
3. Press and release the PTT button. You will hear a ringing tone.
Wait for the called person to answer your call.
4. Press and hold PTT. Wait for the talk permit tone (if configured)
before talking, and release the PTT when listening.
5. To end the call, press . If the called person ends the call, the
Call Ended message is displayed.
6. Press Back to return to the Private Mode display.
Receiving a Private Call
If the Service Provider configured the MTM800 to Automatic Mode
Switch:
1. The MTM800 automatically switches to Private Mode. The
display shows the caller’s identity.
2. To answer the incoming call, press PTT.
3. To end the call, press . The display returns automatically to
the mode it was in before the incoming call arrived.
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but it is not possible to answer the call.