MSI MS-6534 - Manual (Page 89)

AMI ® BIOS Setup
4-15
USB Wakeup From S3
This item allows the activity of the USB device to wake up the system from
S3 sleep state. S3 is the STR (Suspend to RAM) mode. Available settings:
Enabled and Disabled.
Mouse Wakeup From S3
The item controls which button on the PS/2 mouse can wake up the system
from S3 mode. Settings: Disabled, Left-button and Right-button.
Keyboard Wakeup From S3
The item controls which button on the PS/2 keyboard can wake up the
system from S3 mode. Settings: Disabled, PowerKey, Any Key and Specific
Key.
Specific Key for Wakeup
If Keyboard Wakeup From S3 is set to Specific Key, you can assign a
password for the keyboard to awaken the system in the field.
Power Management/APM
Setting to Enabled will activate the Advanced Power Management (APM)
features to enhance power saving modes. Settings: Enabled and Disabled.
Sleep State LED
This item sets how the system uses Power LED on the case to indicate the
suspend/sleep state. Settings are:
Blinking The Power LED blinks to indicate the suspend/sleep
state.
Dual Color The Power LED changes its color to indicate the
suspend/sleep state.
Suspend Time Out (Minute)
The item specifies the length of the period of system inactivity before the
system enters the suspend mode from the standby mode. Nearly all power
use is reduced in the suspend mode. Settings: Disabled, 1, 2, 4, 8, 10, 20,
30, 40, 50 and 60 (Minutes).