MSI MS-6534 - Manual (Page 59)

Chapter 3
3-18
abled and Disabled.
IR Duplex Mode
The field specifies a duplex value for the IR device connected to COM B. Full
Duplex mode permits silmutaneous two-direction transmission. Half Duplex
mode permits transmission in one direction only at a time. Settings: Half and
Full.
IR Pin Select
Consult your IR peripheral documentation to select the correct setting of TxD
and RxD signals. Settings: IR-Rx2Tx2 and RxD2, TxD2.
Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port. Settings:
378/IRQ7, 278/IRQ5, 3BC/IRQ7 and Disabled.
Parallel Port Mode
This item selects the operating mode for the parallel port: SPP, EPP, ECP or
ECP+EPP.
EPP Version
The item selects the EPP version used by the parallel port if it is set to EPP or
ECP+EPP mode. Settings: 1.7 and 1.9.
ECP Mode Use DMA
The item specifies the DMA channel 1 or 3 for the parallel port when it is set to
ECP or ECP+EPP mode.
Onboard Game/Midi Port Address
The items disable or assign the address of the onboard Game/Midi port.
Midi IRQ Select
The item specifies an IRQ for the Midi port.