Power management setup, Award, Bios setup 3-19 – MSI MS-6534 User Manual
Page 60: Next page

AWARD
®
BIOS Setup
3-19
Power Management Setup
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) Function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Enabled. Settings: Enabled and
Disabled.
ACPI Standby State
This item specifies the power saving modes for ACPI function. Options are:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Power Management Setup
↑↓→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
** Reload Global Timer Events **
Primary Master IDE
[Disabled]
Primary Slave IDE
[Disabled]
Secondary Master IDE
[Disabled]
Secondary Slave IDE
[Disabled]
FDC/LPT/COM Ports
[Disabled]
Item Help
Menu Level
8
IPCA Function
[Enabled]
ACPI Standby State
[S1/POS]
Power Management/APM
[User Define]
MODEM Use IRQ
[3]
Suspend Time Out
[Disabled]
Power Button Function
[Power Off]
Wake Up On PME
[Disabled]
Wake Up On Ring
[Enabled]
Wake Up On LAN
[Enabled]
USB Wakeup From S3
[Disabled]
CPU THRM-Throttling
[50.0%]
Resume By RTC Alarm
[Disabled]
Date(of Month) Alarm
0
Time(hh:mm:ss) Alarm
0 : 0 : 0
POWER ON Function
[BUTTON ONLY]
KB Power ON Password
[Enter]
Hot Key Power ON
[Ctrl-F1]
Power Again
[Power Off]
Sleep State LED
[Blinking]
Item Help
Menu Level
8
- Next Page -