Multiquip StreetPro Professional Pavement Saw SP118 - Manual (Page 34)

page 34 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12)
DecOMMiSSiOninG/water tanK (OptiOnal)
DeCommiSSioning Saw/ComponenTS
Decommissioning is a controlled process used to safely
retire a piece of equipment that is no longer serviceable.
If the equipment poses an unacceptable and unrepairable
safety risk due to wear or damage or is no longer cost
effective to maintain, (beyond life-cycle reliability) and is
to be decommissioned, (demolition and dismantlement),
the following procedure must take place:
6. Drain all fluids completely. These may include oil,
gasoline, hydraulic oil and antifreeze. Dispose of
properly in accordance with local and governmental
regulations. Never pour on ground or dump down
drains or sewers.
7. Remove battery (if applicable) and bring to appropriate
facility for lead reclamation. Use safety precautions
when handling batteries that contain sulfuric acid,
8. The remainder can be brought to a salvage yard or
metal reclamation facility for further dismantling.
waTer TanK KiT (opTion)
An optional water tank kit, (P/N SP1WK) is available for use
with the SP118 Saw. See assembly instruction sheet p/n
38265 for the assembly of the kit onto your saw.
The illustration shown below is provided for reference.
5/16 x 1”
5/16 x 3/4”
5/16 x 1”
Figure 26. Water Tank Kit (Option)