Multiquip StreetPro Professional Pavement Saw SP118 - Manual (Page 28)

page 28 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12)
OperatiOn
STarT-up
Figure 16. Engine Stop Switches
CauTion
DO NOT attempt to operate the saw until this manual
has been read and thoroughly understood. Engine
operating steps may vary. See included engine
manufacturer's operating manual.
CauTion
Ensure the work area is clear of tools, debris, and
unauthorized people.
NOTICE
The Engine Stop Switch located on the handlebar
(Figure 16) serves both as an Emergency Engine
Shut-Off and as the primary ON/OFF switch. This
allows the operator to shutdown the saw safely away
from moving parts.
ENGINE STOP SWITCH
ENGINE STOP
SWITCH
(Emergency Stop
and Primary ON/OFF)
(Secondary ON/OFF)
1. Keep Wheel Clamp applied (lever DOWN) until
completely ready for cutting operation.
Figure 17. Parking Brake
2. Ensure the diamond blade has been mounted correctly
and that it is raised above the surface you are about
to saw.
3. Place the fuel valve lever (Figure 18) to the "ON"
position.
Danger
NEVER operate the saw in a confined area
or enclosed structure that does not provide
an ample free flow of air.
warning
never place hands or feet inside the belt
guard or blade guard while the engine is
running. alwaYS shut the engine down
before performing any kind of maintenance
service on the saw
ALWAYS wear approved eye and hearing
protection while operating the saw.