Multiquip StreetPro Professional Pavement Saw SP118 - Manual (Page 19)

Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 19
cOMpOnentS
For quick reference, Figure 3 highlights basic features of
the SP118 Saw.
1.
engine Stop Switch — Located on the handle bar,
easy toggle to STOP engine.
2. anti-vibration Handle Bar — Assists in the harmonic
damping of the saw. Adjustable in height and collapses
flush against the saw frame for efficient storage.
3. water Connector — Standard garden hose connector
station to deliver cooling water to the blade.
4. wrench (1.5" Box-end) — Use when removing the
Blade Shaft Nut.
5. latch — Raise/Lower mechanical STOP.
6. raise/lower Hand wheel — Clockwise to raise
blade out of cut — Counter-clockwise to lower blade
into cut .
7. parking Brake — Mechanical clamping stop.
8. wheels — Heavy-duty roller wheel bearings with
grease fitting.
9. Flange Cover — Guard required for protection as the
flange rotates during operations.
10. Blade guard — Covers saw blade and flips up to allow
blade changes. Must be kept in place during sawing
operations.
11. Front pointer — Adjustable device to allow accurate
blade tracking during sawing operations.
12. engine — HONDA GX390 Gasoline Engine with
Cyclone air filtration and oil alert systems.
13. lifting Bale — Over-center lifting point for safe
transportation of saw.
7
2
3
4
1
5
6
11 12
13
10
8
9
Figure 3. Components