Microstar MS-6547 (v1.X) ATX Mainboard G52-MA00514 - Manual (Page 36)

Chapter 3
3-2
Entering Setup
Control Keys
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press key to
enter Setup.
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter
Setup, restart the system by turning it OFF and On or pressing the RESET
button. You may also restart the system by simultaneously pressing ,
, and keys.
< ­> Move to the previous item
< ¯> Move to the next item
< ¬> Move to the item in the left hand
< ®> Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main menu from a submenu
<+/PU> Increase the numeric value or make changes
<-/PD> Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option Page
Setup Menu
Load Fail-Safe Defaults
Load Optimized Defaults
Save all the CMOS changes and exit
Kap3_6547v1.1.P65 05.02.02, 09:34 2