Microstar MS-6547 (v1.X) ATX Mainboard G52-MA00514 - Manual (Page 28)

Chapter 2
2-16
Wake On Ring Connector: JMDM1
This connector allows you to connect to a modem card with Wake On
Ring function. The connector will power up the system when a signal is re-
ceived through the modem card.
IrDA Infrared Module Header: JIR2
This connector allows you to connect to IrDA Infrared modules. You
must configure the setting through the BIOS setup to use the IR function. The
JIR2 is compliant to Intel Front Panel I/O Connectivity Design Guide.
JMDM1
NC
MDM_WAKEUP
5VSB
1
NC
1
2
5
6
JIR2
Pin Signal
1 NC
2 NC
3 VCC
4 GND
5 IRTX
6 IRRX
JIR2 Pin Definition
Kap2_6547v1.1.P65 05.02.02, 09:36 16