Motorola SBG900 User Manual
Page 87
81
SBG900 User Guide
X
Exit
Overview Installation Troubleshooting
Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
8
Click Next. The following window is displayed:
9
Select The updated driver... and click Next. If the following window is not displayed, verify that the
Motorola
SURFboard Wireless Cable Modem Gateway
CD-ROM is properly inserted in the CD-ROM drive. If you still
cannot find the correct driver file, click Cancel to cancel the installation and perform the procedure for
“
Removing the USB Driver from Windows 98 or Windows Me
”. Then repeat this procedure.
10
After the window shown under step 9 is displayed, click Next.
If a window with the message
Copying Files...
displays and asks for the CD-ROM drive, type the CD-ROM
drive
letter
(for example, “D:”) and click OK.
If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to
complete the installation. To install the files, insert your Windows 98 CD-ROM in the CD-ROM drive and
click OK.
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.